718

Cayenne

2017-2018 Macan – Manual

2017-2018 Macan – Manual

Go to Exterior    |    Go to Interior    |    Go to PCM

Page: 59

Applying driver's A/C settings to the entire vehicle – SYNC mode

The driver's A/C settings are adopted for the entire vehicle in SYNC mode.

Switching on SYNC mode

  • Press button .
    The light indicator on the button lights up.
    The display for the passenger's side adopts the same values as the driver’s settings.

Switching off SYNC mode

  • Press button .
    The light indicator on the button goes out.
    – or –
  • Change the settings for one of the other airconditioned areas.

Air distribution in the rear air-conditioned area when SYNC mode is activated (3-zone air conditioning)
If button or on the front control panel is pressed, air flows from the air outlet vents in the rear center console.

If button is pressed on the front control panel, air flows into the footwell in the rear of the vehicle.

Recommended air-conditioning settings for lone drivers

  • SYNC mode is recommended for maximum passenger compartment comfort.

3-zone air conditioning:
Reducing the air quantity in the rear air conditioned areas does not improve passenger comfort in the front areas.

For information on adjusting the air quantity:

  1. Please see chapter "Opening and closing air vents" on page 57.

Using engine residual heat – REST mode

Fig. 25: Activating and deactivating REST mode

Using engine residual heat
The residual heat of the engine can be used to heat the interior for up to 20 minutes after the ignition has been switched off.

  1. The ignition is switched off.
  • Press button on the front control panel.
    The light indicator on the button lights up.
    The air-conditioning settings cannot be changed in REST mode.

Deactivating the function

  • Press button on the front control panel.
    The light indicator on the button goes out.
    – or –

    Switch on ignition.
    The light indicator on the button indicates the previous setting.

Information
If the battery voltage is too low, REST mode is initially restricted and then switched off.


Adjusting air flow

Three air flow settings are available in automatic mode.

For information on adjusting the air flow output:

  1. Please see chapter "Setting air conditioning" on page 319.
Quick Index
View all Videos 

Models