2017-2018 Macan – Manual

2017-2018 Macan – Manual

Go to Exterior    |    Go to Interior    |    Go to PCM

Page: 306

Inserting and adjusting tie-down rings

Fig. 263: Adjusting the tie-down rings

Tie-down straps or the trunk partition net can be fastened to the tie-down rings.

Make sure that all rings are equally loaded when securing a load. The tie-down rings are not designed to restrain a heavy load in an accident.

  1. Insert the tie-down ring in the opening A of the mounting rail.
  2. Press button C down and slide the tie-down ring in the corresponding direction.
  3. Release button C.
  4. Check that the tie-down ring is locked in position by pushing it.

The opposing tie-down rings must always be inserted in the opposite direction.

Using the trunk cover

The trunk cover is a movable fixture engaged behind the rear seats at the left and right. It can be disengaged as required (e.g. for cleaning) and removed through the open tailgate.

In the event of braking, direction changes or in an accident, objects can slide into the passenger compartment and endanger the occupants.

  • Do not place objects on top of the trunk cover.

Removing trunk cover

Fig. 264: Releasing the trunk cover

  1. Detach restraining straps on both sides.
  2. Place the trunk cover on the side supports.

Fig. 265: Removing the trunk cover

  1. Pull the trunk cover out of the latching mechanism in direction of arrow.
  2. Remove the trunk from the mounts.
Quick Index
View all Videos