718

Cayenne

2017-2018 Macan – Manual

2017-2018 Macan – Manual

Go to Exterior    |    Go to Interior    |    Go to PCM

Page: 251

Swapping headrests
The individual headrests are designed specifically for use on the respective seats. If the headrests are not fitted on the correct seats during re-installation, this will increase the risk of serious injury.

  • Make sure that the headrests are not interchanged during re-installation.

Installing

  1. Fold the backrest on the rear seat roughly halfway forward.
  2. Insert headrest into the guides and push it down until it locks with an audible click.
  3. Press button A and push the headrest down fully. It should no longer be possible to pull the headrest out of the backrest.
  4. Adjust and engage the backrest on the rear seat.


Folding rear seat backrests forward

The rear seat backrests can be folded forward individually to make the trunk larger.

Seat adjustment and rear seat occupants
If persons or animals are in the movement range of the seat during seat adjustment, there is a risk of parts of the body being pinched or crushed.

  • Adjust the seat so that no one is put at risk.


Risk of damage from objects on the rear seats.

  • Do not place objects on the seats when folding the backrests forward.

Folding outer rear seat backrests forward

Fig. 198: Folding outer rear seat backrests forward


  1. Push the headrests down.
  1. Please see chapter "Adjusting headrests on rear seats" on page 250.
  1. Press release button A and fold the backrest forward.

Information
The backrests on the left and center rear seats are joined together. When you fold the left backrest forward, the center backrest will also fold over.
The backrest on the center rear seat can also be folded forward separately.


Folding backrest on the center rear seat forward

Fig. 199: Folding the backrest on the center rear seat forward


  • Actuate release handle A in direction of arrow and fold the backrest forward.
Quick Index
View all Videos 

Models