718

Cayenne

2017 Cayenne – Manual

2017 Cayenne – Manual

Go to Exterior    |    Go to Interior    |    Go to PCM

Page: 54

Information
If the cooling function is switched off manually or automatically, air-recirculation mode ends after approx. 3 minutes.


Setting automatic air-recirculation mode
In automatic air-recirculation mode, the outside-air supply is adjusted depending on the air quality.

At outside temperatures below approx. 41 °F (5 °C), air-recirculation mode is deactivated automatically to prevent the windows from misting.

For information on setting automatic airrecirculation mode:

  1. Please see chapter “Setting air conditioning” on page 341.

Information
The recommended operating mode is automatic air-recirculation mode (default setting).


Applying driver’s A/C settings to the entire vehicle – SYNC mode

Switching on SYNC mode

  • Press button .
    The light indicator on the button lights up.
    The display for the passenger’s side adopts the same values as the driver’s settings.

Switching off SYNC mode

  • Press button .
    The light indicator on the button goes out.
    – or –
    The settings for one of the other airconditioned areas change.

Air distribution in the rear airconditioned area when SYNC mode is activated (4-zone air conditioning)
If button or is pressed on the front control panel, air flows from the air outlet vents in the rear center console.

If button is pressed on the front control panel, air flows to the footwells in the rear of the vehicle.

Recommended air-conditioning settings for lone drivers

  • SYNC mode is recommended for maximum passenger compartment comfort.

4-zone air conditioning:
Reducing the air quantity in the rear air-conditioned areas does not improve passenger comfort in the front areas (4-zone air conditioning only).

For information on adjusting the air quantity:

  1. Please see chapter “Opening and closing air vents” on page 52.

Using engine residual heat – REST mode

Fig. 22: Activating and deactivating REST mode

Using engine residual heat
The residual heat of the engine can be used to heat the interior for up to 20 minutes after the ignition has been switched off.

  1. The ignition is switched off.
  • Press button on the front control panel.
    The light indicator on the button lights up.
    The air-conditioning settings cannot be changed in REST mode.

Deactivating the function

  • Press button on the front control panel.
    The light indicator on the button goes out.
    – or –

    Switch on ignition.
    The light indicator on the button indicates the previous setting.
Quick Index
View all Videos 

Models