718

Cayenne

2015-2016 Cayenne – Manual

2015-2016 Cayenne – Manual

Page: 172

Setting and changing the desired speed
Preconditions

  1. Adaptive cruise control (ACC) is switched on.
  2. Vehicle is moving.
  3. No stationary objects are detected in front.

Setting the desired speed

  1. Press the control stalk on the steering wheel forward (position 1).
    The current driving speed is stored as the desired speed, which will be maintained automatically (within the control range of 30 – 210 km/h (20 – 130 mph)), and appears orange in the status display B.
    The red triangle G under the progress bar for the speed control range shows the speed of your vehicle.
  2. Release the accelerator pedal.
    The desired speed is maintained automatically unless a vehicle travelling in front is detected as driving slower than the desired speed.

Information
If your vehicle is stationary and you press the control stalk forward (position 1), the message “ACC not possible when parked” appears on the multi-function display.

If a stationary object was detected in front, the message “ACC not possible Stationary object” appears on the multi-function display.


Increasing the desired speed

  • Press the control stalk on the steering wheel forward (position 1).
    The desired speed is increased in steps of 1 km/h (1 mph). or
    Press the control stalk on the steering wheel forward and keep it pressed (position 1).
    The desired speed is increased in steps of 10 km/h (5 mph).
    The status display B shows the new desired speed.
    The red triangle G under the progress bar for the speed control range shows the speed of your vehicle.

Reducing the desired speed

  • Briefly pull the control stalk on the steering wheel towards the steering wheel (position 2).
    The desired speed is decreased in steps of 1 km/h (1 mph). or
    Pull the control stalk on the steering wheel towards the steering wheel and keep it pulled (position 2).
    The desired speed is decreased in steps of 10 km/h (5 mph).
    The status display B shows the new desired speed.
    The red triangle G under the progress bar for the speed control range shows the speed of your vehicle.

Setting the desired distance
The desired distance from the vehicle in front can be set in four stages.

Information
When you are setting the desired distance, the “ACC” main menu for adaptive cruise control (ACC) is displayed temporarily on the multi-function display.

When you first actuate the rocker switch Z, the “ACC” main menu appears without changing the desired distance.


Quick Index
View all Videos 

Models