718

Cayenne

2014-2016 Panamera – Manual

2014-2016 Panamera – Manual

Page: 150

Storing the settings on the car key
Ergonomic and comfort settings can be individually assigned to the car keys.

Information
Individual memory information can be stored on a total of 4 car keys. In the case of further car keys, the memory information from key 4 is adopted.


Automatic storage through locking of the vehicle
This function must be activated on the multifunction display.

For information on switching the automatic storage function on and off:

  • Please see the chapter "SWITCHING AUTO MEMORY ON AND OFF" on page 132.
  • The settings are stored on the car key being used when the vehicle is locked.
  • On vehicles with Porsche Entry & Drive, settings are stored by pressing the locking button in the door handle.

In what situation is it useful to activate the "Auto Memory" function?
Each driver uses his or her own key. When locking the vehicle, the last selected settings are stored on the key. When changing drivers, the personal settings can be retrieved via the respective keys.

Information
If the "Auto Memory" function is activated, the settings stored manually on the key are overwritten each time the vehicle is locked.


Storage by pressing key button 3 in the driver’s door

  • The ignition must be switched on.
  1. Press the SET button. The LED in the button lights up.
  2. Press key button 3 within 10 seconds.
  3. The ergonomic and comfort settings (keyspecific) are stored. Storage is acknowledged acoustically and the LED in the SET button goes out.

In what situation is it useful to store the settings on key button 3?
You would like to store or retrieve a few of the settings when stationary or during driving and not only when locking/unlocking the vehicle. Make sure that the "Auto Memory" function is deactivated.

Otherwise, the settings will be overwritten when locking the vehicle.

Retrieving the settings from the car key
Ergonomic and comfort settings can be individually retrieved from the car key.

Automatic retrieval through unlocking of the vehicle
The settings are retrieved from the car key being used when the vehicle is unlocked and the driver’s door is opened.

By pressing key button 3 in the driver’s door

  • Press and hold key button 3 until all settings have been applied or
  • With the driver’s door open and the ignition switched off, briefly press key button 3.
    The settings are automatically applied.

Why do the settings on key button 3 not correspond to the ones I have stored?
If the "Auto Memory" function in the multifunction display is activated, all the ergonomic and comfort settings are stored on the key when locking the vehicle. Settings stored on key button 3 are overwritten in the process.

Quick Index
View all Videos 

Models