718

Cayenne

2013-2014 Cayenne – Manual

2013-2014 Cayenne – Manual

Page: 97

Setting visibility

To ensure that your PCM can be connected to other devices via the Bluetooth interface, it must be "visible" (=recognizable) for other devices during the connection operation.
To increase security, you can deactivate visibility of the PCM after the connection operation.
To prevent further unwanted connection requests, you can deactivate visibility of the PCM after the connection operation.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET PHONE"
    > "Bluetooth settings".
    > Switch visibility of the PCM on ( ) or off ( ) by selecting "PCM visible".

Finding a cordless handset

This function starts the search for the cordless handset.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET PHONE"
    > "Bluetooth settings"
    > "Find handset".
    The search is started. If the handset has been found and is not in the charging cradle, it will ring in
    confirmation and to help you locate it in the vehicle.

Phonebook settings

Setting the memory for the phonebook

You can set whether the phonebook entries on the SIM card, the phonebook entries in the telephone memory, and/or the vCards stored in the PCM should be used for the display in the phonebook. This allows you to adapt the phonebook list of the PCM to your list in the cell phone.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET PHONE"
    > "Phonebook settings"
    > "Phonebook memory".
  4. Make the setting you want by selecting it.

If the transfer of the phonebook data from your cell phone to the PCM fails, it may be because your cell phone is working with security mechanisms that affect transfer using the "Phone Book Access Profile" (PBAP).
These security mechanisms require the PCM to be authorized on your cell phone. As part of this, the telephone requests a "user ID" and a "password" from the PCM. In order for the PCM to gain access to the phonebook, it must "log into" the telephone.
Since the PCM uses the fixed parameters "UserID: PCM3" and "Pass: 0000" for this login, these parameters must be preset as permissible on your cell phone.
Please refer to the operating instructions for your cell phone to find out whether these settings are required on your cell phone and how to make them.

Quick Index
View all Videos 

Models