718

Cayenne

2013-2014 Cayenne – Manual

2013-2014 Cayenne – Manual

Page: 47

You will only be able to access the "SET DISC / AUX" menu if there is at least one audio source from the DISC area available.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET DISC / AUX"
    > "Volume adaptation"
    > "Volume AUX".
  4. Make the setting you want by selecting the symbols and or by turning the right rotary knob.

External Bluetooth® audio source

You can also connect an external audio source that is partially operated on the source itself rather than on the PCM via a Bluetooth connection.

For the connection and operation of the external Bluetooth audio source, the PCM also supports the A2DP/AVRCP profile.
The extent to which the external Bluetooth audio source can be operated on the PCM depends on the functions supported by the audio source. Operation of the external Bluetooth audio source on the PCM is therefore restricted in some cases. In other cases operation on the PCM is not possible. The audio source is then operated on the connected device itself. Please consult the operating instructions for the respective device to find out how to do this.

Accident hazard. Distraction could result in you losing control of the vehicle.

  • Operate the external audio source only if you are safely in control of your vehicle and when the traffic conditions permit. If in doubt, stop the vehicle and operate the external audio source while the vehicle is parked.

Calling up the external Bluetooth audio source/starting playback

  • Keep pressing the button until the "AUX BT" audio source is highlighted in the bottom line.
    Playback starts automatically if it is supported by the Bluetooth device. It may be necessary to start playback manually on the Bluetooth device.

The mode "AUX BT" is only displayed if there is a corresponding device connected to the interface.

Activating the interface

To use an external Bluetooth audio source, the AUX Bluetooth function must be activated in the "SET DISC / AUX" menu.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET DISC / AUX".
    You will only be able to access the "SET DISC / AUX" menu if there is at least one CD/DVD inserted or at least one audio source activated in the menu ( ).
  4. To activate ( ) or deactivate ( ) the function, select "AUX Bluetooth".
    When you deactivate "AUX Bluetooth", the Bluetooth devices are deleted from the list if necessary.
Quick Index
View all Videos 

Models