718

Cayenne

2013-2014 Cayenne – Manual

2013-2014 Cayenne – Manual

Page: 137

Extended memory

In the PCM menu you have the option to store different settings for your vehicle for up to three ignition keys and for two memory buttons. Both driver related settings from the instrument cluster as well as PCM settings are stored in this process.
The following PCM settings are stored:
– The personal data fields of the trip data in the main menu
– The stations of the various preset memories in radio mode stored on the station buttons
– The sound settings for the various audio sources
– The volume settings for the various audio sources
– The settings for the map view
– The settings for voice control
The vehicle dependent settings are described in the following sections.
To find out more about the extended memory, please also refer to the corresponding chapter in the owner's manual.

The range of vehicle settings available in the PCM depends on the vehicle equipment and the vehicle model.

Setting light options

Setting the daytime running lights
If the "Daytime Run. Lights" function is active ( ), the lights will always be switched on when the engine is running. This applies regardless of the light switch setting.
The lighting for the instruments and switches is still switched on or off using the light switch regardless of the "Daytime Run. Lights" setting.
The function is only available in countries where day driving lights are not mandatory.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET CAR"
    > "Vehicle functions"
    > "Light & visibility"
    > "Exterior lights".
  4. To activate ( ) or deactivate ( ) the function, select "Daytime Run. Lights".

Setting the fade-out time for the exterior lights of the vehicle
You can set a fade-out time of between 10 and 120 seconds for your vehicle's exterior lights.

  1. Press the button.
  2. Press the button or touch the tab of the same name in the header.
  3. Select "SET CAR"
    > "Vehicle functions"
    > "Light & visibility"
    > "Exterior lights".
    > "Fade-out time".
  4. Set the time period you want by touching the two symbols and or by turning the right rotary knob.
    The setting is applied immediately.

The "Fade-out time" setting also changes the illumination duration when unlocking the vehicle. To find out more about this, please refer to the chapter "Welcome home function" in the owner's manual.

Quick Index
View all Videos 

Models