718

Cayenne

2013-2014 Cayenne – Manual

2013-2014 Cayenne – Manual

Page: 130

The route is only recorded when the display of "Additional data" is activated in the "SET sport display" menu. To find out more, please refer to the section "Setting the display of additional data" on page 134.

The first lap of the recording is used as a reference lap if none has already been loaded. This is needed to display the circle diagram in the lap details as well as to display the remaining laps left in the tank.

A maximum of 63 laps can be stored for each recording.

Lap details
The route is displayed when the Sport display is called up. You can then switch between the route and the lap details by selecting the symbols and or by turning the rotary knob . This consists of:
– The time for the fastest lap
– The current lap time
– Details of the remaining tank range (in remaining laps and as a distance)
– The available remaining memory

The left half of the display shows a circle diagram that indicates the distance covered referred to a complete lap.
The circle diagram assumes different colors depending on whether the current lap is faster, as fast as, or slower than the previous fastest lap:
– Green - current lap is faster
– Yellow - current lap is as fast
– Red - current lap is slower
The number in the center of the colored circle indicates
the current lap.

The first recorded lap is used as the reference lap if no existing reference lap has been loaded.
Neither the remaining number of laps nor the fastest lap time is displayed while the first lap is being recorded. The circle diagram is not filled yet either.

Available memory is full
If the available memory is full, a message to this effect appears in the display. The lap details will continue to be displayed, however the lap during which the message appears as well as any further laps will no longer be recorded.
A maximum of 8 hours can be recorded.

Stopping recording

Selecting "Stop" in the on-board computer menu stops the stopwatch and therefore the recording in progress.
The recorded data is stored.

Resuming recording

You are returned to the Sport display the next time you restart the stopwatch by means of "Res." in the on-board computer menu.
This is only possible, however, if you do not reset the stopwatch in the on-board computer menu beforehand.

Quick Index
View all Videos 

Models