Temperature and air quantity, rear control panel
Press button for the relevant air-conditioned area downwards.
The preset temperature value is shown on the air-conditioning display.
If LO or HI appears on the display, the system is operating at maximum cooling or heating power. Automatic mode is switched off.
If one air-conditioned area is set to LO or HI,
the other air-conditioned areas are also set to LO or HI. Pressing the button for the relevant air-conditioned area selects the preset temperature.
The air-conditioning system always cools and heats the passenger compartment to the preset temperature at maximum cooling or heating temperature. Setting the temperature temporarily to a lower or higher value does not cool or heat the passenger compartment to the desired temperature more quickly.
Setting air quantity
The selected air quantity is shown in a bar display above the button . The more bars that are displayed, the more air flows into the passenger compartment.
Increasing air quantity
Press button for the air quantity to the relevant air-conditioned area upwards.
Reducing air quantity
Press button for the air quantity to the relevant air-conditioned area downwards.
Press button for the relevant air-conditioned area to switch back to automatic mode.
If the air quantity was reduced so much that OFF appears on the air-conditioning system display, the supply of air from the outside is interrupted.
Air Shut-off Impairing Vision
The windows can mist up if the air quantity setting is OFF.
Only select air quantity setting OFF for short periods.
If windows mist up, press for the left and right vehicle side on the front control panel upwards (increase air quantity).