718

Cayenne

2013-2014 Cayenne – Manual

2013-2014 Cayenne – Manual

Page: 300

Wheel Bolts

  • Always clean the wheel bolts before fitting.
  • Wheel bolts must not be greased.
  • Replace damaged wheel bolts.
    Only use genuine Porsche wheel bolts assigned especially to this model or wheel bolts of similar quality which have been manufactured according Porsche specifications and product requirements.

Tightening torque
Tightening torque for wheel bolts:
118 ftlb. (160 Nm).

Security wheel bolts
The adapter (wrench socket) for the security wheel bolts is in the tool kit.

  • To loosen or tighten the wheel bolt with anti-theft protection, the adapter must be used between the wheel bolt and the wheel bolt wrench.
  • When positioning the wrench socket, ensure that it engages fully in the teeth of the wheel bolt.

Information
On vehicles with 0.67 in. (17 mm) spacers on the rear axle, the wheels are secured with steel nuts. There is no anti-theft protection for the wheel nuts.

  • If the wheels have to be removed at the workshop, please do not forget to hand over the socket for the security wheel bolts along with the car key.

Long wheel bolt with blue spherical cap ring

Wheel bolts with fitted 0.2 in. (5 mm) spacers

  • If spacers are fitted, all wheels must be fitted using long 2.13 in. (54 mm) wheel bolts.

The long wheel bolts are marked on the face surface in blue, or the moveable spherical cap ring is galvanized in blue (arrow).

Tightening torque for wheel bolts:
118 ftlb. (160 Nm).

Incorrect wheel bolts
If 0.2 in. (5 mm) spacers are fitted, wheels are held securely only if long wheel bolts (2.13 in. (54 mm)) are used. Wheels may become loose while driving if they are fitted using short wheel bolts, which could result in loss of vehicle control leading to an accident.

  • After fitting 0.2 in. (5 mm) spacers, use only long wheel bolts (2.13 in. (54 mm)) on all four wheels.

Quick Index
View all Videos 

Models