Emergency operation – unlocking the
ignition key/control unit
If the vehicle battery is dead, the ignition key (or
the control unit on vehicles with Porsche Entry &
Drive) can only be removed if the emergency
operation is performed.
Carefully lever off the fuse box cover on the
driver’s side with a screwdriver and remove it.
Unclip metal hook A on the inside of the fuse box cover.
Use metal hook A to remove the plastic cover B from the ignition lock.
Make sure that plastic cover B is not lost.
Turn ignition key to ignition lock position 0 (initial position).
Press metal hook A into opening C. You will hear an unlocking noise.